Deck Staining & Sealing in Elkhart County
Deck cleaning, staining and sealing that brings back the color of the wood and protects it from sun, rain and Indiana winters.
Protect the Wood Before It Turns Gray
Bare wood does not last long outside in northern Indiana. Sun breaks down the surface, rain soaks in, and freeze and thaw cycles open up cracks. A deck that goes a few years without stain turns gray, splinters and starts to check. A good stain keeps water out and slows all of that down, and it makes the deck look like somewhere you want to spend an evening.
- Decks and stairsDeck boards, joists you can see, stairs and landings stained evenly.
- Railings and spindlesThe slowest part of any deck job, done by hand so every spindle gets covered.
- Fences and pergolasWood fences, pergolas and gazebos stained to match the deck or the house.

What Our Deck Staining Includes
Stain only works on clean, dry, open wood. So every deck staining job starts with cleaning and a dry time, not with a brush. We check for loose boards and popped nails, clean and brighten the wood and then apply a quality penetrating stain.
- Cleaning and brighteningDirt, mildew and gray weathered fibers removed so the stain can soak in.
- Small repairsPopped nails and screws set, loose boards pointed out so you can decide on replacement.
- Even applicationStain worked into the boards and back brushed so there are no lap marks or puddles.

How We Stain a Deck
Deck staining is simple on paper and easy to get wrong. Here is the order we do it in and why each step matters.
- 1Inspect the deckWe walk the boards, rails and stairs, check for soft wood and old coatings and recommend a stain type.
- 2Clean the woodThe deck is cleaned with a deck cleaner and a gentle power wash at the right pressure for wood.
- 3Strip or brightenOld failing stain is stripped where needed, and a brightener restores the natural color of the wood.
- 4Let it dryThe wood has to be dry before stain goes on, which usually means at least a day or two of good weather.
- 5Stain and back brushStain is applied to the boards, rails and stairs and back brushed so it soaks in evenly.
- 6Dry and walk throughWe keep foot traffic off until it is ready and walk the finished deck with you.
Transparent, Semi Transparent and Solid Stain
The type of stain you choose changes the look of the deck and how often it needs to be redone.
Once a deck has a solid stain or paint on it, going back to a transparent stain means stripping it first. We will explain the tradeoffs before you choose.
What Affects the Cost of Deck Staining
Deck staining is priced on the size of the deck and how much work it takes to get the wood ready. The square footage of the boards, the number of stairs, the length of railing and the number of spindles all add up. Railings take longer than open boards because every spindle is done by hand.
Condition matters a lot. A newer deck that just needs a clean and a coat is a quick job. A deck with old peeling stain needs to be stripped first, which adds a day or more. Elevated decks and second story decks take extra setup. We look at all of this at the free estimate and give you a written price.
When to Stain a Deck in Northern Indiana
The best time to stain a deck around Elkhart County is late spring through early fall, when temperatures are mild and there is a dry stretch in the forecast. Stain needs the wood to be dry going on and at least a day without rain afterward. Very hot afternoons in full sun can make stain dry too fast, so we often work mornings in July and August.
If you just built a new deck with pressure treated lumber, it usually needs to dry out for a while before it will take stain well. A simple water test helps: if water beads on the boards, wait. If it soaks in, the wood is ready.
Thinking about a solid color instead? Have a look at our deck painting page. And if the house needs work too, we can quote exterior painting in the same visit.
Related Outdoor Services
These services are often done along with deck staining.
Deck Staining Near You
We stain and seal decks in Wakarusa, Goshen, Elkhart, Nappanee, Warsaw and the lake towns and neighborhoods in between.
Frequently Asked Questions
Common questions about deck staining and sealing.
Most decks around here need to be restained every two to three years. Transparent stains wear faster, solid stains last longer, and decks in full sun or heavy use need attention sooner.
Transparent stain shows the most grain but needs recoating most often. Semi transparent adds color and protection while showing grain. Solid stain covers the wood like paint and lasts the longest.
New pressure treated lumber often needs time to dry out first. Sprinkle some water on the boards. If it beads up, wait. If it soaks in, the deck is ready for stain.
It depends on the size of the deck, the stairs and railings and how much cleaning or stripping is needed. We give a free written estimate after looking at the deck.
Light foot traffic is usually fine after a day or so, depending on the product and the weather. Wait a bit longer before putting heavy furniture and grills back.
Always. Every deck is cleaned and brightened first. Stain put on over dirt or gray wood fibers does not soak in and fails early.
Have a painting question? Call or text us at (574) 475-3603.
Get a Free EstimateReady for fresh paint inside or out? Get a free estimate from JW Painting today.
Get My Deck Staining Estimate
Tell us about your deck and send a photo if you can. We will come take a look and send a free written quote.
Deck cleaning, staining and sealing across Elkhart County and nearby towns.